Yagi directional broadband antenna 700MHz..4GHz Aaronia HyperLOG 7040

• Design: Omni-Directional (radial isotropic)
• Polarization: Linear
• Frequency range: 700MHz - 6GHz
• Impedance: 50 Ohms

 

• Near Field Probes compatible with any Spectrum Analyzer or Measurement Receiver
• Design: Active E & H near field probes
• Frequency range: DC (1Hz) to 6GHz
• Nominal impedance: 50 Ohm
• Preamplifier: UBBV2 (40dB, DC to 8GHz)
• Gain: Diff. Depending on probe (see data sheets)

 

• Compatible with any Spectrum Analyzer brand
• Design: Biconical & Logarithmic-Periodic (combination)
• Frequency range: 20MHz to 6GHz
• Max. input power: 310W AM
• Immunity test field strength:10V/mm
• Nominal impedance: 50 Ohm
• Accuracy: 0,3dB
• VSWR: <2:1 (typ.)
• Gain: 6dBi (typ.)

 

• Design: Omni-Directional (radial isotropic)
• Frequency range: 700MHz to 2,5GHz
• Max. input power: 40W AM (800MHz)
• Nominal impedance: 50 Ohm
• Gain: -2Bi to 2dBi (typ.)
• Antenna factor: See data sheet graph
• RF connection: SMA (m) or N (see optional adapter)

 

• Frequency range: 10MHz to 8GHz
• DANL: -145dBm(1Hz)
• DANL with Preamp: -160dBm(1Hz)
• Max. power at RF input: +10dBm
• Lowest sample time: 10mS
• Resolution (RBW): 1kHz to 50MHz
• Units: dBm, dBµV, V/m, A/m, W/m²(dBµV/m, W/cm² etc. via PC software)
• Detectors: RMS, Min/Max
• Demodulator: AM, FM, PM

 

• Frequency range: 1Hz to 1MHz (30MHz)
• Magnetic field (Tesla): 1pT to 2mT (typ.) expandable up to a amount of Tesla with PBS1
• Magnetic field (Gauss): 10µG to 20G (typ.) (only with option 006)
• Only with Option 009, 24bit resolution: 10nG to 20G (typ.) (Gauss)
• Electric field: 0,1V/m to 20kV/m (typ.)
• Resolution (RBW): 0,3Hz to 1MHz (1-3-10 step)
• Units: V, V/m, T, G, A/m

 

• Frequency range: 400 MHz to 4,4 GHz
• Up to 3V/m output power (1m distance)
• Perfect for RF immunity measurements
• Perfect for RF attenuation measurements
• Highest power level: +17dBm
• Smallest power level: -48dBm

• Design: Omni-Directional (radial isotropic)
• Frequency range: 300MHz to 8GHz
• Nominal impedance: 50 Ohm
• Peak Gain: 6.5dBi
• Avg. Gain: 3.5dBi
• Avg. VSWR: 2.5
• RF connection: SMA (m) or N (see optional adapter)

 

• Compatible with any Spectrum Analyzer brand
• Design: Biconical (radial isotropic)
• Frequency range: 50MHz to 700MHz
• Max. input power: 5W AM (100MHz)
• Nominal impedance: 50 Ohm
• Gain: -18dBi (@100MHz)

 

• Spectran HF-80200 V5 (9kHz - 20GHz) Real-Time Handheld Spectrum Analyzer
• Frequency range: 9kHz to 20GHz
• Up to 175MHz Real-Time bandwidth
• POI below 1µS
• Real-time I/Q streaming via USB
• Very fast sweep mode, scans 20GHz in less than 20mS (in preparation)