Low Cost Handheld Spectrum Analyzer 100MHz..4GHz Aaronia Spectran HF4040

• Frequency range: 10Hz to 10kHz
• Magnetic field (Tesla): 1pT to 100µT (typ.)
• Magnetic field (Gauss): 100µG to 1G (typ.)
• Electric field: 1V/m to 2.000V/m (typ.)
• Resolution (RBW): 1Hz to 3kHz (1-3-10 step)
• Units: V/m, T, G, A/m
• Interface: USB 2.0/1.1

 

• Near Field Probes compatible with any Spectrum Analyzer or Measurement Receiver
• Design: Active E & H near field probes
• Frequency range: DC (1Hz) to 6GHz
• Nominal impedance: 50 Ohm
• Preamplifier: UBBV2 (40dB, DC to 8GHz)
• Gain: Diff. Depending on probe (see data sheets)

 

• Compatible with any Spectrum Analyzer brand
• Design: Biconical (radial isotropic)
• Frequency range: 20MHz to 3GHz
• Max. output power: 100mW AM
• Nominal impedance: 50 Ohm
• Gain: -5dBi to 41dBi

 

• RF frequency range: 10MHz to 6GHz
• DANL: -135dBm(1Hz)
• DANL with Preamp: -150dBm(1Hz)
• Max. power at RF input: +10dBm
• Lowest sample time: 10mS
• Resolution (RBW): 3kHz to 50MHz
• Units: dBm, dBµV, V/m, A/m, W/m²(dBµV/m, W/cm² etc. via PC software)
• Detectors: RMS, Min/Max
• Demodulator: AM, FM

 

• Compatible with any Spectrum Analyzer brand
• Design: Biconical (radial isotropic)
• Frequency range: 20MHz to 1GHz
• Max. output power: 100mW AM
• Nominal impedance: 50 Ohm
• Gain: 2dBi to 41dBi

 

• Frequency range: 400 MHz to 4,4 GHz
• Up to 3V/m output power (1m distance)
• Perfect for RF immunity measurements
• Perfect for RF attenuation measurements
• Highest power level: +17dBm
• Smallest power level: -48dBm

• Compatible with any Spectrum Analyzer brand
• Design: Directional Logarithmic-Periodic
• Frequency range: 700MHz to 6GHz
• Max. input power: 50W AM (800MHz)
• Nominal impedance: 50 Ohm
• VSWR: <1:2 (typ.)
• Gain: 5dBi (typ.)

 

• Worlds first 9kHz to 3GHz Handheld Isotropic Antenna
• Suitable for any Spectrum Analyzer
• High Gain and Low Noise
• Built-in Bypass Preamplifier
• Manual or Automatic Axis Switch
• Battery or DC Powered
• Incl. Control Software

 

• Compatible with any Spectrum Analyzer brand
• Design: Directional Logarithmic-Periodic
• Frequency range: 680MHz to 8GHz
• Max. input power: 50W AM (800MHz)
• Nominal impedance: 50 Ohm
• VSWR: <1:2,5 (typ.)
• Gain: 5dBi (typ.)

 

• Compatible with any Spectrum Analyzer brand
• Design: Biconical & Logarithmic-Periodic (combination)
• Frequency range: 20MHz to 3GHz
• Max. input power: 310W AM
• Immunity test field strength:10V/mm
• Nominal impedance: 50 Ohm
• Accuracy: 0,3dB
• VSWR: <2:1 (typ.)
• Gain: 6dBi (typ.)