Biconical Radial-Isotropic Broadband Antenna 30MHz..1GHz Aaronia BicoLOG 30100E

• Compatible with any Spectrum Analyzer brand
• Design: Logarithmic-Periodic (LogPer)
• Frequency range: 700MHz to 4GHz
• Max. input power: 50W AM (800MHz)
• Nominal impedance: 50 Ohm
• VSWR: <1:2 (typ.)
• Gain: 4dBi (typ.)

 

• Frequency range: 10MHz to 8GHz
• DANL: -145dBm(1Hz)
• DANL with Preamp: -160dBm(1Hz)
• Max. power at RF input: +10dBm
• Lowest sample time: 10mS
• Resolution (RBW): 1kHz to 50MHz
• Units: dBm, dBµV, V/m, A/m, W/m², dBµV/m, W/cm² etc.

 

• Frequency: 1Hz to 20MHz (30MHz)
• Analog Input 200nV to 200mV (typ.)
• Resolution (RBW): 0,3Hz to 10MHz (1-3-10 step)
• Units: Volt
• Detectors: RMS, Min/Max
• Demodulator: AM, FM

 

• Frequency range: 1Hz to 1MHz (30MHz)
• Magnetic field (Tesla): 1pT to 2mT (typ.) expandable up to a amount of Tesla with PBS1
• Magnetic field (Gauss): 10µG to 20G (typ.) (only with option 006)
• Only with Option 009, 24bit resolution: 10nG to 20G (typ.) (Gauss)
• Electric field: 0,1V/m to 20kV/m (typ.)
• Resolution (RBW): 0,3Hz to 1MHz (1-3-10 step)
• Units: V, V/m, T, G, A/m

 

• Spectran HF-80200 V5 (9kHz - 20GHz) Real-Time Handheld Spectrum Analyzer
• Frequency range: 9kHz to 20GHz
• Up to 175MHz Real-Time bandwidth
• POI below 1µS
• Real-time I/Q streaming via USB
• Very fast sweep mode, scans 20GHz in less than 20mS (in preparation)

 

• Compatible with any Spectrum Analyzer brand
• Design: Biconical (radial isotropic)
• Frequency range: 50MHz to 700MHz
• Max. input power: 5W AM (100MHz)
• Nominal impedance: 50 Ohm
• Gain: -18dBi (@100MHz)

 

• Frequency range: 700MHz to 2,5GHz
• Amplitude: -80dBm to 0dBm (typ.)
• Lowest sample time: 100mS
• Resolution (RBW): 1MHz to 50MHz
• Units: dBm, dBµV, V/m, A/m, W/m²(dBµV/m, W/cm² etc. via PC software)
• Input: 50 Ohm SMA RF-input (f)
• Interface: USB 2.0/1.1

 

• Frequency range: 23.5 MHz to 6 GHz
• Up to +18dBm output power (female SMA-connector)
• Smallest power level: -48dBm
• Up to 65dB dynamic range
• Frequency accuracy: 15Hz (<100MHz), 150Hz (<1GHz), 600Hz (<4GHz)
• Modulations: AM, FM, PM

 

• Compatible with any Spectrum Analyzer brand
• Design: Biconical & Logarithmic-Periodic (combination)
• Frequency range: 20MHz to 6GHz
• Max. input power: 310W AM
• Immunity test field strength:10V/mm
• Nominal impedance: 50 Ohm
• Accuracy: 0,3dB
• VSWR: <2:1 (typ.)
• Gain: 6dBi (typ.)

 

• Frequency Range: 9kHz - 1MHz
• Design: Ferrite core, Active
• Internal Amplifier: 25dB (optional 35dB), battery powered (3-4 hours) or continuosly powered via included power supply
• Impedance: 50 Ohm
• RF connector: SMA (female), optional N connector